YORKVILLE EXM 70 Mode D'emploi page 5

Master Section
Master Control
The Master Control is used to set the overall level of the Yorkville EXM70.
Note: When two systems are linked together, the Master Control only
affects the level of the unit on which it is located.
Effects Selector
Three effects are available with this control, as well as an off (no-effects)
position. The effects are Delay, Hall Reverb and Room Reverb. The selected
effect is available to all 3 input channels and the amount of effect applied
is controlled by the individual channel's effects knob.
Link Section
In situations where additional bass or input channels are needed, The Link
jacks can be used to connect multiple EXM70 systems and/or a subwoofer.
Link Jacks
The Link jacks are in parallel and we have provided both a male and female
XLR to help make it more convenient to 'link' EXM70 enclosures together. To
use the Link feature, insert a standard XLR patch cable between cabinets.
Pole Mount
The Yorkville EXM70 has a built in pole stand adapter and can use a stan-
dard pole-mount speaker stand.
Frequency Response (Hz +/- 3db)
Speaker Configuration - Inputs
Speaker Configuration - HF
Link In/Out (type / configuration)
Dimensions (DWH xbackW, inches)
Dimensions (DWH xbackW, cm)
1/4-inch T.R.S.
Phone Plug
Tip = 0°
Sleeve = Ground
Specifications
Program Power (watts) 70 watts (140 watts Peak)
Max SPL (dB) 115
90-20k
2 x 5-inch
1-inch Soft Dome
Inputs 3
Channel 1 Input XLR / ¼-inch Combi-jack
Channel 1 Controls
Level, Shape, Effects Send
Channel 2 Input XLR / ¼-inch Combi-jack
Channel 2 Controls Level, Shape, Effects Send
Channel 3 Input XLR Mic & 1/8-inch TRS Stereo Jack, Bluetooth
Channel 3 Controls
Level, Shape, Effects Send, Bluetooth
Master Volume Control Yes
XLR Connector
LED Indicators Power, CH1, CH2, CH3 & Effect Clip, Master Clip
Other Features
Digital Effects
17.5 x 7.75 x 8
44.5 x 19.7 x 20.25
Weight (lbs/kg) 14.5 / 6.6
Ring = 180°
3
EXM
Specifications subject to change without notice
XLR Plug
(Male)
Pin 1 = Ground
Pin 2 = 0°
1 2
Pin 3 = 180°
3
Balanced 1/4-inch T.R.S. to Balanced XLR
Room
Hall
Delay
Off
EFFECTS
LINK
LINK: Used for
connecting inputs
when LINKing
to other powered
speaker cabinets.