Télécharger Imprimer la page
YORKVILLE EXM 70 Mode D'emploi
Masquer les pouces Voir aussi pour EXM 70:

Publicité

Les langues disponibles

Les langues disponibles

Liens rapides

1. Channel 1 Input
The combi-jack is for a mic
(XLR) or a balanced line level
(1/4-inch) source. 24V phantom
power is present on the XLR
portion of the jack.
2. Channel 2 Input
The combi-jack is for a mic (XLR) or an
instrument (1/4-inch). 24V phantom power
is present on the XLR portion of the jack.
3. Channel 3 Input
The XLR jack is for a mic, the 1/8-inch
phone jack for media players and the
Bluetooth™ for streaming audio. 24V
phantom power is present on the XLR
input of the jack.
Note: When Bluetooth™ is used the
volume is controlled by Channel 3's
Level control.
4. Bluetooth™
Bluetooth™ operating range is rated 10
meters (33 feet). The quality of the link
can be affected by an excess of traffic in
the 2.4 GHz bandwidth or obstructions.
Pairing
For 'Pairing' depress the Enable Button
for 4 seconds and then release.
1
I N P U T S
1
Mic/Line
2
2
Mic /
Instrument
3
3
Mic
Mic
3
Aux In
http://www.yorkville.com/manuals/
EXM 70
Status
Slow blinking indicates pairing mode
while fast blinking indicates an available,
unpaired connection. A steady (solid)
blue light indicates it's paired and audio is
available to Channel 3.
5. Channel Level Controls
The Level controls adjust the channel gain
over an 85 dB range. Use these controls to
adjust each channel's volume in the overall
system mix. The LED indicates clipping.
6. Channel Shape Controls
Setting this control towards 'Music' shapes
the response to be suited for reproducing
prerecorded music while setting the control
towards 'Speech' accentuates the mid-
frequencies which help speech and vocals.
The response is flat in the center position.
7. Channel Effects Controls
This control determines how much of
the selected effect is applied to the
corresponding channel.
L E V E L
EFFECTS
Clip
SHAPE
- +
Music Speech
EFFECTS
Clip
SHAPE
- +
Music Speech
EFFECTS
Clip
SHAPE
- +
Music Speech
Pair ing :
Hold for 4 seconds
To get the full Owner's Manual please visit our website at
or, if you need a printed version call 905-837-8777
Canada Voice: 905-837-8481
Canada Voice: 905-837-8481
Yorkville Sound
Yorkville Sound
550 Granite Court
550 Granite Court
Pickering, Ontario
Pickering, Ontario
L1W-3Y8 CANADA
L1W-3Y8 CANADA
Printed In CANADA
QuickStart-EXM70-00-1v7 • YS#QSTARTEXM70 • December 15, 2022
Bluetooth
Three effects are available with this
control, as well as an off (no-effects)
position. The effects are Delay, Hall
Reverb and Room Reverb. The
selected effect is available to all 3
input channels and the amount of
effect applied is controlled by the
individual channel's effects knob.
10. Link Jacks
The Link jacks are used to connect multiple
EXM70 systems and/or a subwoofer.
The jacks are in parallel, both a male
and female XLR to help make it more
convenient to 'link' enclosures together. To
use the Link feature, insert a standard XLR
patch cable between cabinets.
11. Pole Mount
The built in pole stand adapter and can
use a standard Yorkville pole-mount
speaker stand.
8
7
MASTER
6
9
5
4
EFFECTS
U.S.A. Voice: 716-297-2920
U.S.A. Voice: 716-297-2920
Fax: 905-839-5776
Fax: 905-839-5776
w w w . y o r k v i l l e . c o m
w w w . y o r k v i l l e . c o m
Yorkville Sound Inc.
Yorkville Sound Inc.
4625 Witmer Industrial Estate
4625 Witmer Industrial Estate
Niagara Falls, New York
Niagara Falls, New York
14305 USA
14305 USA
TM
8. Master Control
The Master Control is used to
set the overall level of the
Yorkville EXM70.
9. Effects Selector
10
MAIN
Output
MAIN
Input
Room
To LINK, Connect
the MAIN Output
Hall
to the MAIN Input
of another powered
Delay
speaker cabinet
Off
Fax: 716-297-3689
Fax: 716-297-3689

Publicité

loading

Sommaire des Matières pour YORKVILLE EXM 70

  • Page 1 The built in pole stand adapter and can can be affected by an excess of traffic in 7. Channel Effects Controls use a standard Yorkville pole-mount the 2.4 GHz bandwidth or obstructions. This control determines how much of speaker stand.
  • Page 2 8. Commande Master sur la partie XLR du jack. “Enable” pendant 4 secondes, puis relâchez. La commande Master est utilisé pour définir le niveau général du Yorkville EXM70. 2. Entrée Canal 2 Status Le combi-jack est pour un micro (XLR) ou une Le clignotement lent indique le mode de 9.