Section 9  System Configuration; Display Item Structure; Normal Operational Display Menu Page P00; Accessing The X8I Configuration Screens - Ingersoll Rand X8I Mode D'emploi

DISPLAY ITEM STRUCTURE

Operational system status and values are accessible from
the normal user display. To view status or values that are
not normally visible on the default screen, press UP or
DOWN. All standard user display items are viewable only
and cannot be adjusted. The standard user display items
are regarded as "Menu Page 00" items.
All adjustable value, parameter or option item displays
are grouped into "menu mode" lists. Items are assigned
to a list according to type and classification. Item lists
are identified by page number (or menu number). All
adjustable parameters and options are assigned to menu
mode pages "P01" or higher.
NORMAL OPERATIONAL DISPLAY MENU
PAGE P00
At controller initialization, all display elements and LED
indicators are switched on for three seconds and then the
normal operating display is shown. In normal operational
display mode, the main display will continuously show
the detected system pressure and the Item display will
show the first item of the "Page 00" menu. User menu
"items" can be selected using the UP or DOWN buttons at
any time. Pressing the ENTER button will lock any selected
item display and inhibit return to the default display.
When an item display is locked, the "lock key" symbol
will be shown. To unlock an item display, press UP or
DOWN to view an alternative item display or press RESET
or ESCAPE. No item values, options or parameters can
be adjusted in "Page P00". If a fault condition occurs, the
fault code becomes the first list item and the display will
automatically jump to display the fault code. More than
one active fault code item can exist at any one time and
can be viewed by pressing UP or DOWN. The most recent
"active" fault will be at the top of the list.
SECTION 9  SYSTEM CONFIGURATION
ACCESSING THE X8I CONFIGURATION
SCREENS
Access Code:
Access to adjustable menu page items is restricted by
access code. To access menu mode pages press MENU (or
UP and DOWN together); an access code entry display is
shown and the first code character will flash.
Use UP(plus) or DOWN(minus) to adjust the value of the
first code character then press ENTER. The next code
character will flash; use UP or DOWN to adjust then press
ENTER. Repeat for all four code characters.
If the code number is less than 1000 then the first code
character will be 0(zero). To return to a previous code
character press ESCAPE. When all four code characters
have been set to an authorized code number press
ENTER. An invalid code will return the display to normal
operational mode; page 'P00' .
= 0032
Access Code
Access Code Timeout:
When in menu mode, if no key activity is detected for
a period of time the access code is cancelled and the
display will automatically reset to the normal operational
display.
Menu Mode Navigation:
In menu mode the menu 'page' number will be
highlighted at the top of the display.
To select a menu 'page' press UP or DOWN. To enter the
highlighted menu 'page' press ENTER; the first item of the
menu 'page' will be highlighted. Press UP or DOWN to
scroll though the selected menu 'page' items.
27
Access Code Accepted
Access Code Rejected