Reminder Function
This function allows you to program the oven as a kitchen timer in two cases:
to start cooking at certain time.
that the cooking has completed for your next action.
The countdown time can be set from 1 minute to 9 hours�
■
For case
In standby mode,
1. Press
.
and
2. Press
or
3. Press
to start. " " in the time display will flash, and the reminder time is set. It will
begin to countdown.
■
Note:
•
Beep will sound 10 times to remind you to start cooking after the time reaches
and
will go off, and the display will change to clock indicating current time.
•
During the countdown, you can pause the reminder by pressing
To restart, press
•
During the countdown, you can cancel the reminder by pressing
■
For case
While the cooking is in progress,
1. Press
.
and
2. Press
or
3. Press
to start the reminder. The display will revert back to cooking display and
will be visible on the display.
■
Note:
•
Beep will sound 10 times to remind you to start next action after the time reaches
.
and
•
You cannot pause or cancel the reminder function once it is set.
Delay Function/End Function
Only when the current time has been set, Delay Function/End Function can be used
for either of 2 cases below:
To delay start of cooking, after setting the end time of cooking and the cooking duration
time. The cooking starts automatically and end at the time pre-programmed.
To start cooking immediately after setting the end cooking time to shutdown the oven
automatically when the cooking is completed.
All manuals and user guides at all-guides.com
will be visible on the display,
to set the reminder time.
.
will be visible on the display,
to set the reminder time.
will go off, and the cooking will continue.
will flash.
once.
twice.
will flash.
EN-11
.