Safety Instructions - Binzel ABIDRIVE CW Mode D'emploi

3 Safety Instructions

The power supply is labelled with a nameplate as follows:
Fig. 3
When making inquiries, please provide the following:
• Device type, device number, year of construction, certificate of conformity
3 Safety Instructions
Please observe the attached safety instructions.
3.1 Classification
The warning signs used in the operating instructions are divided into four different levels and are shown prior
to specific work steps. Arranged in descending order of importance, they have the following meaning:
Describes an imminent threatening danger. If this danger is not avoided, it will result in fatal or extremely
critical injuries.
Describes a potentially dangerous situation. If not avoided, it can result in serious injury.
Describes a potentially harmful situation. If not avoided, it may result in slight or minor injuries.
NOTICE
• Describes the risk of impairing work results or the risk that the work may result in material damage to
EN - 6
Alexander Binzel Schweisstechnik
GmbH & Co. KG
Postfach 10 01 53
D-35331 Giessen
Geräte-Nr. / Device No.
Stromversorgung /
xvz
Power Supply
IEC 60974-5
ABIDRIVE CW
U = 230 V / 1 ~ 50 Hz
1
IP21
Power supply nameplate
DANGER
WARNING
CAUTION
the equipment.
Made in Germany
Baujahr / Manufactured
xvz
I = 0,5 A
1
T 0,63
TIG cold wire feeder