Jimmy BX6 Mode D'emploi page 6

Brushroll Cleaning
Turn off the machine and unplug the power cord,
rotate the right lock knob anticlockwise with hand
from locked position to unlock position (Figure 8)
to remove the brushroll to clean up.(Figure 9)
After brushroll cleaning,install the brushroll and
the brushroll cover into the machine in turn and
lock the latch of the brushroll.
Note: For safety reasons, please turn off the machine
and unplug power cord before cleaning brushroll.
Maintenance and Storage
Please clean dust cup and filter after each use for
further use. It is recommended to replace a filter
after 30-50 hours of working time(depending on
specific situation) for better use.
Any paper, lead glass, plastic will greatly affect
the effect of UV light. Please wipe and clean the
UV tube regularly for better use.
Do Not touch the UV tube as dirt will affect UV
light effect.
Put the machine in cool and dry place if the
machine is to be idled. Do Not leave it in direct
sunlight or humid environment.
4
1
Dust cup lid
Dust cup
2
Marking ribbon
MIF filter
4
Cyclone metal filter
Mini-brush
6
Lock Unlock
8
Release button
Cyclone
3
Tapping downward
Filter
5
Rotate dust cup lid
7
Brushroll
assembly
Brushroll cover
9