Air Shutter Adjustment (oven burner only)
(10.6mm). (See Figure 29)
Reduce
the shutter opening if:
•
•
is not burning all the way around
•
is noisy like a small blow torch.
Increase
the shutter opening if:
•
•
there is no sharp blue cone
•
soot appears on the bottom of cooking pans.
The air shutter is adjusted by loosening the locking screw and rotating the shutter to allow more or less air into the tube.
Oven Burner Assembly
The oven burner assembly is visible and accessible for servicing when the oven bottom panel is removed. The burner
assembly is made up of several components as shown below.
thermocouple
burner
igniter
IMPORTANT
The thermocouple and igniter positioning is very
important to the operation of the oven. These two
items must be checked before putting the appliance
into operation. (See Figure 31).
NOTE: Before putting the 7200 /9200 Gas Range into
service, be sure that all the setup procedures recommended
in this manual have been completed.
Oven burner assembly
Figure 30
33
Air Shutter Adjustment
Figure 29
Figure 31