Can Y - WEBTEC HPM7000 Manuel D'utilisation

Operation
6.10.1 CAN X
The CAN X tile displays the following information:
Designation
CAN type
Baud rate
Up to 24 Webtec sensors (max. 24 channels) can be connected to the
CAN X port. Other setting adjustments are also possible.

6.10.2 CAN Y

The CAN Y tile displays the following information:
Designation
CAN type
Baud rate
The menu is used to select the operating mode and perform further
settings.
The following operating modes are available for selection:
Designation
Webtec CAN
External CAN
When Webtec CAN operating mode is active, up to 24 Webtec sensors
(max. 24 channels) can be connected. Sensors with automatic sensor
detection (Webtec CAN) are detected by the device and are operational.
Other setting adjustments are not possible.
92
Description
Current operating mode
Current Baud rate
Description
Current operating mode
Current Baud rate
Description
Webtec CAN (standard connection)
External CAN (CANopen)