Creating An Spc (Service Project Container) - WEBTEC HPM7000 Manuel D'utilisation

Operation
6.7.2

Creating an SPC (Service Project Container)

An SPC must be created prior to starting or after stopping a measurement.
1 Connect the sensors to the device according to your application.
Further information is available in Chapter & "Connecting the
Sensors".
2 Set the measurement view required. Further information is available
in Chapter "Edit Channels".
3 Open the options and tap on the Save Template as button.
Fig. 39 Create an SPC (Service Project Container) (1)
Ä The Save template window opens.
84