Earlex SprayPort HV6002 Manuel D'instructions page 8

PROBLEM CAUSE
Little or no spray Air inlet blocked
Turbine has no No power at supply
power
Cable fuse has blown
Circuit Breaker (3) has tripped
Incorrect or damaged power cord
set used
Worn turbine brushes
TROUBLESHOOTING
8
ACTION REQUIRED
Check the condition of the Air Filter (1)
and clean or replace
Check air inlets, air vents and air hose for
blockages
Check the power supply
Where applicable check fuse and replace
if necessary
Reset the Circuit Breaker (3)
Use correct power cord set. Replace if
necessary
Replace brushes at an authorized
service centre