Cembre NR-13E Notice D'utilisation Et Entretien page 12

ENGLISH
– Support trolley type CS-SD and CS-SD-E
NOTE: Fit the 10 cm socket extension
when using the wrench on support
trolley.
Contact Cembre for further
information.
– Interface Kit KCS-NR
code 2874001
Enables the wrench to be mounted in vertical position
on support trolley.
– Interface Kit KHOR-NR
code 2874003
Enables the wrench to be mounted in
horizontal position on support trolley.
Check that the trolley is fitted
at 1500 N rather than 1900 N.
– TARPCOVER 027-NR
code 2593279
For the protection of the impact wrench
mounted on support trolley.
with a gas spring calibrated
12