Efapel MODUS 55 Mode D'emploi page 8

Random mode setting (2 circuits)
Main reset
WIRING DIAGRAMS
L
N
3,5mm
CIRCUIT DIAGRAMS
DIMENSIONS
- setting of the maximum time of ON and OFF for the relay on random mode, "random", which is the same
1
for both, but connected to ON separately; menu input by pushing the
choosing the wanted screen for:
2 - setting of the maximum time to connect to ON the relay for minutes - temporising will be in random
time from 1 to
- setting of the maximum time to disconnect to OFF the relay for minutes - temporising will be in random
3
time from 1 to
2
Screen : push the
confirmation by pushing the
3
Screen : push the
minutes), confirmation by pushing the
At any moment it is possible to exit all the menu screens without saving settings by pushing the buttons
or .
To cancel the electronic timer settings (hours, dates, settings, etc.), it is necessary to maintain simultaneously pushed
1
the buttons (
2 All the screens will be lit;
3 After some time, the electronic timer will request the date and hours settings.
If it also necessary to cancel all the saved programs, you should also push the
1 circuit
External Input
L/N
Before installing the device, it is necessary
!
to remove the security protection of the
battery to avoid a discharge.
1 circuit
minutes;
minutes;
4
button to enter; with the cursors
button; the screen 3 will appear.
5
button to enter; with the cursors
button; the screen
and ) in the main menu, for 3 seconds;
L
N
MAXIMUM RECOMMENDED LOAD
button; using the cursors
setting of the maximum time to connect to ON (for minutes),
setting of the maximum time to disconnect OFF (for
2 will appear.
key.
2 circuits
External Input
2 circuits
for
L/N
DIN TH 35