Restarting After A Long Period Of Inactivity; Requesting Technical Assistance - Zhermack ELITE MIX Manuel D'utilisation Et D'entretien

RESTARTING AFTER A LONG PERIOD OF INACTIVITY

8.4
Should the machine be used after remaining idle for a long period proceed as described in Chap. 6
(start-up).
If there are any faults or malfunctions proceed as described in Chapter 9 (Troubleshooting). If the
problem persists or is not covered by the information in this chapter contact your Authorised Servicing
Centre immediately.

REQUESTING TECHNICAL ASSISTANCE

8.5
To obtain technical assistance choose one of the following options:
1. contact your Authorised Servicing Centre.
2. Telephone the Zhermack Customer Assistance Service on the number +39 0425.597.611 and proceed
as follows: give personal data (e.g. address and telephone n.), state the information on the equipment
ID plate (see paragraph 3.3) and explain the problem clearly.
3. Fax all the above information and a properly filled out ID Form (see Appendix A.2) to +39
0425.53.596.
126 of 264
MAINTENANCE AND USE MANUAL
EN
ELite mix