Hilti HA EXO-O1 Mode D'emploi Original page 6

1.3 Product-dependent symbols
1.3.1 Symbols on the product
The following symbols can be used on the product:
The power tool supports near-field communication (NFC) technology, which is compatible with
iOS and Android platforms.
Warning: Magnetic field
1.4 Product information
products are designed for professional users and only trained, authorized personnel are
permitted to operate, service and maintain the products. This personnel must be specifically informed about
the possible hazards. The product and its ancillary equipment can present hazards if used incorrectly by
untrained personnel or if used not in accordance with the intended use.
The type designation and serial number are printed on the rating plate.
▶ Write down the serial number in the table below. You will be required to state the product details when
contacting Hilti Service or your local Hilti organization to inquire about the product.
Product information
Exoskeleton
Generation
Serial no.
2 Safety
2.1 Safety instructions
WARNING Study all safety instructions and other instructions, images and technical data with
which this product is provided. Failure to comply with the instructions below can cause serious injuries.
Keep all safety precautions and instructions for future reference.
Personal safety
▶ The catches of the shoulder straps and the arm supports contain magnets. The magnets can affect
cardiac pacemakers or comparable implants. A cardiac pacemaker can be switched to test mode and
cause indisposition. Under certain circumstances, a defibrillator might cease to function. Wearers of
devices of this nature should keep at least 100 mm clear of the magnets. Warn wearers of devices of this
nature to keep clear of magnets. These persons are not permitted to use the product.
▶ Wear suitable work clothes. Do not wear jewelry or loose clothing. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewelry or long hair can be snagged by moving parts.
▶ Avoid unusual body positions. Keep proper footing and balance at all times.
▶ Only persons who are familiar with it, who have been trained on how to use it safely and who understand
the resulting hazards are permitted to use the tool.
▶ Keep children and other persons clear when the product is in use.
▶ The product can be used by only one person.
▶ Do not use the product to lower a person by rope or to secure a person. Do not secure a tool tether to
the product.
▶ Do not attach to the waist belt objects that could restrict correct operation of the product.
▶ Make sure that you do not snag with the product on fixed or movable objects.
▶ It is not permissible for the product to interfere with the functionality of your personal protective
equipment.
Product safety
▶ Avoid overstraining the load-bearing components. A sudden loss of function can lead to injuries. Use the
product only within its specified limits.
▶ Always check the product prior to use to ensure that it is in full working order, free of wear and
undamaged. Do not continue to use the product after it has been dropped or if it is damaged. Contact
Hilti Service.
▶ To avoid damage, do not expose the product to sources of heat. Comply with the stated temperature
limits for storage and operation.
2 English
HA EXO-O1
01
2327944
*2327944*