Publicité
Les langues disponibles
Les langues disponibles
8.4
Checking and cleaning ball socket
▶ Check the movement of the ball end in the ball socket.
Do this by moving the threaded rod.
Result 1 / 2
The ball moves freely.
▶ No action necessary.
Result 2 / 2
The ball is stiff
▶ Undo the two screws in the ball socket and
remove the cover.
▶ Remove the ball from the ball socket and clean
the ball and the socket with a soft cloth.
▶ Reinsert the ball in the ball socket and place the
cover in position.
▶ Tighten the two screws to a tightening torque of
0.5 Nm.
9
Transport and storage
Transport
▶ Make sure that the equipment is held securely throughout all transport operations.
▶ After transporting, always check all visible parts and controls for signs of damage and make sure that
they all function correctly.
▶ Transport and store the exoskeleton only with the expanders at zero tension.
Storage
▶ Store this product in a dry place, where it cannot be accessed by children or unauthorized persons.
▶ After a long period of storage, always check all visible parts and controls for signs of damage and make
sure that they all function correctly.
10
Troubleshooting
If the trouble you are experiencing is not listed in this table or you are unable to remedy the problem by
yourself, please contact Hilti Service.
Trouble or fault
Lack of expander tension
Articulation unit sticks
Pads chafe
11
Disposal
Most of the materials from which Hilti tools and appliances are manufactured can be recycled. The
materials must be correctly separated before they can be recycled. In many countries, your old tools,
machines or appliances can be returned to Hilti for recycling. Ask Hilti Service or your Hilti representative
for further information.
12
Manufacturer's warranty
▶ Please contact your local Hilti representative if you have questions about the warranty conditions.
13
Further information
For more information on operation,
qr.hilti.com/manual?id=2282599
This link is also to be found at the end of the documentation, in the form of a QR code.
*2327944*
Possible cause
Expander disengaged or incor-
rectly installed
Expander worn
Articulation unit worn
Pads dirty
Pads folded over or worn out
technology,
2327944
Action to be taken
▶ Check that the expanders are
correctly seated.
▶ Contact Hilti Service.
▶ Contact Hilti Service.
▶ Clean the pads. → page 16
▶ Contact Hilti Service.
environment and recycling,
follow this link:
English
19
Publicité
