Settings (Video Setup Page)
HDMI
AUTO (default)
Select this to have the signal output when your TV or monitor
is connected to the HDMI terminal.
OFF
Select this when you don't use the HDMI terminal.
No signal is output from the HDMI terminal.
< When your TV isn't connected to the HDMI terminal, never
select "ON". No picture will be shown on the monitor.
RESOLUTION
This setting is available only when "HDMI" is set to "ON".
Select proper resolution for yout TV or monitor.
480P 60Hz
720P 60Hz
1080i 60Hz
1080P 60Hz
576P 50Hz (Default)
720P 50Hz
1080i 50Hz
1080P 50Hz
36
Settings (Preference Page)
TV TYPE
PAL (Default)
Select this when the unit is connected to a PAL TV.
AUTO
Select this when the unit is connected to a MULTI TV.
NTSC
Select this when the unit is connected to an NTSC TV.
AUDIO, SUBTITLE, DISC MENU
You can select a preferred language for audio, subtitle and
disc menu.
< When you select a preferred language that is not recorded on
the DVD, one of the recorded languages is automatically
selected.
< You can override the AUDIO setting in the SETUP menu by
pressing the AUDIO button on the remote control unit while a
DVD disc is playing.
< You can override the SUBTITLE setting in the SETUP menu by
pressing the SUBTITLE button on the remote control unit
while a DVD disc is playing.
< Select OFF to turn subtitles off.
Note that subtitles on some discs cannot be removed even
when you select OFF.
PARENTAL
See page 37 for details.
DEFAULT
All the items in the SETUP menu (except for the password and
parental control) will be reset to the default settings.