Dictator Z 1100 Instructions D'installation page 4

INSTALLATION
Installation position
The mounting bracket is installed on the sliding door at approx. 1 mm from the closing edge
and approx. 80 mm below the upper edge of the door.
Installation steps
1. Attach the cylinder to the casing with the two bolts supplied.
2. Screw the door damper to the mounting bracket using two M6 screws.
3. To determine the position of the hook, fold down the roller lever.
4. Attach the hook to the door frame only through one of the slotted holes so that it is in line with
the door damper and the rubber roller barely touches the front edge of the hook.
5. After making sure that it's in the correct position, secure with screws through the remaining
holes.
See drawing under "Dimensions" for all important installation dimensions.
Questions?
We'll be happy to help! Just contact us!
4
DICTATOR Technik GmbH · +49 (0)821 246730 · info@dictator.de · en.dictator.de
Installation instructions - Door damper Z 1100