Work Area; Electrical Safety - Lincoln 1200 Mode D'emploi

PRESSURE RELIEF
VALVE
Power-Luber Performance Graph
Power luber preformance Graph
(Graph at 72° (22°C) with NLGI #2 grease.
Models 1200, 1240, 1242, 1242E, 1244
(Graph at 72° (22°C) with nlgi #2 grease)
7
6
5
4
3
2
1
0 1000 2000
(68.9) (138)
OUTPUT PRESSURE

WORK AREA

1. Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable
liquids, gases or dust. The PowerLuber can
create sparks which may ignite the dust or
fumes.
2. Keep bystanders, children and visitors away
while operating. Distractions can cause you to
make mistakes.
Form 422014
VALVE DISCHARGE
3000 4000 5000 6000
(206.9) (276) (344.8) (414)
1200
Figure 1
Time to Dispense One Full Grease Cartridge
30
25
20
15
10
5
0
P.S.I.
BAR
0
Note: Two fully charged batteries were used to dis-
pense one grease cartridge at 4,000 PSI (272 bar).

ELECTRICAL SAFETY

1. A battery operated PowerLuber with a separate
battery pack must be recharged only with the
specified battery charger. A charger that may be
suitable for one type of battery may create a risk
of fire when used with another battery.
2. Use battery operated tool only with specifically
designed battery pack. Use of any other batter-
ies may create a risk of fire.
3. Batteries are shipped in an uncharged state.
Charge batteries for 12 hours before first use.
1000 (69.9) 2000 (138) 3000 (206.9)
PSI (Bar)
Page Number - 3
Series1
4000 (276)