Lincoln 1200 Mode D'emploi page 34

Declaration of conformity as defined
by Machinery Directive 98/37/EG An-
nex II A
This is to declare that the design of the
PowerLuber Grease Gun
in the version supplied by us, complies with the provi-
sions of the directive 98/37/EG
.
Applied harmonized standards in particular:
EN 292-1 Safety of machinery part 1 Basic
terminology, methodology
EN 292-2 Safety of machinery part 2
Technical principles and
specifications
EN 809 Pumps and pump units for liquids
Safety requirements
EN 60204-1 Safety of machinery Electrical
equipment of machines Part 1:
General requirements
Déclaration de la conformité comme
définie par l'annexe II A de Machinery
Directive 98/37/EG.
Ce doit déclarer que la conception du
PowerLuber A Graisse
dans la version fournie par nous, se conforme aux dispo-
sitions du 98/37/EG directif.
Normes harmonisées appliquées en particulier
EN 292-1 Safety of machinery part 1 Basic
terminology,
methodology
EN 292-2 Safety of machinery part 2 Techni-
cal principles and
specifications
EN 809 Pumps and pump units for liquids
Safety
requirements
EN 60204-1 Safety of machinery Electrical
equipment of
machines Part 1: General require-
ments
St. Louis, MO 08/23/01, Paul Conley, Chief Engineer
Page Number - 34
Declaration of conformity according
to EMV directive 89/336 EWG
We declare that the model of the
PowerLuber Grease Gun
in the version supplied by us, complies with the provi-
sions of the above mentioned directive.
Applied harmonized standards in particular:
EN 50081-1 Electromagnetic compatibility
Generic emission standard Part 1:
Residential, commercial and
light industry.
EN 50082-2 Electromagnetic compatibility
Generic immunity standard Part 2:
Industrial environment
EN 55022 Limits & methods of measurement
of radio interference charateristics of
information technology equipment.
EN 61000-3 Electromagnetic compatibility (EMC)
Part 3. Limits. Section 2. Limits for
Harmonic current emissions
(equipment input current < = 16A
pep phase). Section 3. Limitation of
voltage fluctuations and flicker in low
voltage supply systems for
equipment with rated current
< = 16A.
Déclaration de la conformité selon la
directive 89/336 EWG d'cEmv
Nous déclarons que le modèle du
PowerLuber A Graisse
dans la version fournie par nous, se conforme aux dispo-
sitions de la directive mentionnée ci-dessus.
Normes harmonisées appliquées en particulier
EN 50081-1 Electromagnetic compatibility
Generic emission standard Part 1:
Residential, commercial and light
industry.
EN 50082-2 Electromagnetic compatibility
Generic immunity standard Part 2:
Industrial environment
EN 55022 Limits & methods of measurement
of radio interference charateristics of
information technology equipment.
EN 61000-3 Electromagnetic compatibility (EMC)
Part 3. Limits. Section 2. Limits for
Harmonic current emissions
(equipment input current < = 16A
pep phase). Section 3. Limitation of
voltage fluctuations and flicker in low
voltage supply systems for
equipment with rated current
< = 16A.
St. Louis, MO 08/23/01, Paul Conley, Chief Engineer
Form 422014