Beninca DA.24A Livret D'instructions page 7

Switchboard for two direct voltage motors 24Vdc, 240W total power to control two-wings gate.
Characteristics:
• Possibility of impulse by means of separated push-button with Open-Stop-Close function.
• Possibility of impulse by means of a single push-button with Open-Stop-Close-Stop function or through
radio-control, by inserting a receiver in the preset connector.
• Presetting for the link of photo-devices with the function "inversion of the movement" during the clos-
ing phase and a momentary stop during the opening phase.
• Outputs for the connection of the blinker, the electro-lock and opened wing pilot.
• Possibility to insert the automatic closing function; the length of the pause is adjustable.
• Condominium function is adjustable.
• Braking device at adjustable speed with intervention controlled by limit switches. Limit switches devices
are separated for the two motors, to have the independence of the wings movements.
• Device for detection of obstacles, with amperometric sensor and adjustable sensibility.
• Pedestrian function.
Structure
The glass-fiber basis consists of the power part, the supplies and all the connections for the clutch boards
and the links.
Dimensions
205x135x85mm (board).
Power supply
• 230Vac ±10%, 1.5A.
Protections
Fuse protection against the short-circuit of the general supply line;
fuse protection against the short-circuit of the auxiliary lines;
fuse protection against the sort-circuit of the high voltage line;
varistor protection on high and low voltage against the overvoltage;
electronic limiters protection against the short-circuit of the motor.
Switchboard DA.24A
7