Canceling A Cycle; Changing A Cycle Or Setting - Haier ESD400 Guide De L'utilisateur

English
CANCELLING A CYCLE
1. Carefully open the door slightly to stop the cycle. Wait for the spraying action
to stop before opening the door to access the control panel.
2. Press the key shown below for 1 second.
3. Close the door. The dishwasher starts a 2-minute drain ( if needed ). Let the
dishwasher drain completely.
To stop the drain
You can press Start/Reset again to stop the drain.
Remember to drain the dishwasher before starting a new cycle.

Changing a Cycle or Setting

While a cycle is running
1. Open the door.
2. Press the key shown below for 1 second.
Start/Reset light goes off.
3. Select a new cycle and/or option.
4. Press Start/Reset button as shown below.
5. Start/Reset glows.
6. Check the detergent dispensers. They must be filled properly for the new cycle.
7. Close the door.
19