Cycle Charts - Haier HDBL655AFS Guide De L'utilisateur

CYCLE CHARTS

Select the wash cycle and options desired. Unless you select a delay wash, the
dishwasher starts filling once the door is closed and you press the Start/Cancel
button. After filling, and a brief wash period, the machine will pause for a 5 minute
energy saving soak interval. During this time, dried and baked on soil is softened for
easier removal later in the cycle. You can select options as the machine is filling.
Cycle times are approximate and will vary with options selected. Hot water is
necessary to activate dishwasher detergent and melt fatty food soils.
An automatic sensor will check the incoming water temperature and if it is not hot
enough, the cycle may be delayed to heat the water during the main wash. This also
happens when HI-TEMP WASH is selected and a hotter temperature is required to
wash heavier soil loads.
•
A " " shows what steps are in each cycle. Temperatures indicate where extra heat is
added. Water usage is shown in U.S. gallons/liters.
HEAVY
Use this cycle for hard to clean, baked on, cookware and harder than normal water
conditions.
Pre- Second Main
Wash Pre- Wash
Wash
• •
Sanitize
X
NORMAL
Use this cycle for loads with normal amounts of food soil.
Pre- Second Main
Wash Pre- Wash
Wash
•
Sanitize
X
12
Rinse Rinse Final
• • •
118°F
(48°C)
AVAILABLE OPTIONS
Hi Temp
Rinse Rinse Final
•
107° -
118°F
(42° -
48°C)
AVAILABLE OPTIONS
Hi Temp
Dry
Heated
Rinse
• •
136°F
(58°C)
Heated Dry
X
Dry
Heated
Rinse
• •
122° -
136°F
(50° -
58°C)
Heated Dry
X
Running Water
Time Usage
(min) (gal/L)
140 6 gal.
(22.8 L)
X
Running Water
Time Usage
(min) (gal/L)
100-130 3 to 6
gal. /
(10.8 -
23 L)
X