Berner BCLL BASIC Notice D'utilisation page 58

9 Wall mount
10 Battery compartment cover
11 1/4" x 20 female thread
Unpacking
FITTING THE WARNING LABEL
The safety warnings on the label shown on the laser must be formulated in
the language of the user.
For that purpose, a separate sheet of self-adhesive labels has been
supplied with the tool.
WARNING: Check that the safety warnings on the label have
been formulated in your language.
The warnings should read as follows:
LASER RADIATION
DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
• If the warnings are in a foreign language,
proceed as follows:
– Remove the required label from the sheet.
– Carefully place the label over the existing label.
– Press the label in place.
ASSEMBLY AND ADJUSTMENT
WARNING! Do not place the laser in a position which
may cause anyone to intentionally or unintentionally
stare into the laser beam. Serious eye injury may result from
staring at the beam.
Replacing Batteries (fi g. B)
The attachment uses batteries of type LR6 (AA).
• Open the battery compartment cover (10).
E N G L I S H
55