Publicité
Les langues disponibles
Les langues disponibles
UNPACKING
This product requires some assembly.
PACKING LIST
- String Trimmer
- Safety Guard
- Charger and Battery Pack
- Auxiliary Handle
- Instruction Manual
- Hardware Bag
WARNING: Do not install battery until assembly is complete.
Failure to comply could result in accidental starting and possible
serious personal injury.
WARNING: If any parts are damaged or missing do not operate
this product until the parts are replaced. Failure to heed this
warning could result in serious personal injury.
Carefully remove the product and any accessories from the box.
Make sure that all items listed in the packing list are included.
Inspect the product carefully to make sure no breakage or damage
occurred during shipping.
Do not discard the packing material until you have carefully
inspected and satisfactorily operated the product.
If any parts are damaged or missing, please call 1-800-313-5111
for assistance.
ATTACHING THE GUARD ( Fig. 1)
Insert the guard as shown below by pushing it to the bottom of its
seat on trimmer head. Using a Phillips screw driver, secure the guard
by installing one (1) screw. Remove blade cover.
WARNING: Do not operate the trimmer without the guard attached.
Safety Guard
ASSEMBLY
ATTACHING THE AUXILIARY HANDLE ( Fig. 2)
Install the auxiliary handle onto the shaft. Insert the bolt through the
base of the auxiliary handle and tighten the wing nut. Before
tightening the wing nut, position the handle at the most comfortable
position for the operator.
Wing Nut
HEIGHT ADJUSTMENT ( Fig. 3)
The overall height of the trimmer can be adjusted. Release the clamp on
the tube. The tubes can then be adjusted shorter or longer. When the
desired height is achieved, lock in place with the clamp.
Blade
Screw
Fig. 1
4
Auxiliary Handle
Fig. 2
Fig. 3
Publicité
