Electrolux 600cfm Instructions D'utilisation page 9

Make Electrical Connection from
Blower to Control Box
Connect the Blower electrical conduit to the Control
Box using the conduit fitting attached to the cable.
Use pliers to tighten the locknut. DO NOT use a
screwdriver or other instrument to strike and tighten
the locknut on the conduit fitting.
DOWNDRAFT
CONTROL BOX
P8
P11
CONTROL BOARD
Control Box
Blower
Conduit
Converting the Blower
Connect the Blower wiring to the Control Board,
following the wiring diagram.
PIGTAIL
GND CONTROL
HOUSING
Line
Neutral
Ground
Internal Blower
Wiring Connection
INTERNAL BLOWER
BLK
WHT
120 VAC
GRN
Ground (Green)
Line (Black)
Neutral (White)
Wire Nuts (3)
9