Thermador HPWB30 Manuel D'utilisation Et D'entretien page 6

LIGHTS
CAUTION: Should read before replacing the lamps, switch power off at service panel and
lock service panel disconnecting means to prevent power from being switched on accidentally.
NOTE: Turn off the lights and fan. Allow the lights to cool before handling. If new lights do not
operate be sure lights are inserted correctly before calling service.
Note! Lamps are not supplied and must be purchased separately.
Replace Lights
A ys use the mildest cleaner that
stainless steel finishes in the direction o he
er c , place all parts in their proper positions be ore us
The cleaners recommended
products to
Care and Cleaning Chart
A Anodized
Aluminum
B Aluminum
C Plastic
Painted sur -
CLEANING THE HOOD
do the job. se clean, so
indicate a type and do not constitute an endorsement. se all
directions.
T
them.
T
and dry.
DO NOT USE powdered cleansers or steel wool pads.
loths, s
. Wipe area dry to a oid
.
W
T
T
6
Watt
s or paper t s.
ter mar .
r.
r
A