Speed Regulator; Hints For Operation; Carbon Brushes - Westfalia WS920 Instructions Originales

Speed Regulator

With the speed regulator (3) you can regulate the speed of the angle
grinder as required.

Hints for Operation


When using the angle grinder for cutting, avoit tilting the angle
grinder out of the cutting line. It is advisable to use diamond
discs when cutting hard stone.

For the best results while rough grinding hold the machine
against the surface in an angle between 30° and 40° in smooth,
even movements.

The maximum permitted speed of the disc must be equal to or
higher than the maximum no load speed of the machine. The
maximum permitted speed of the cutting disc is printed on the
disc.

Use only cutting or grinding discs with a maximum permitted
rotation speed of 6600 revolutions per minute.

Never cut materials containing asbestos with this angle grider.

Carbon Brushes

The angle grinder is delivered with a spare set of carbon brushes.
Carbon brushes should only be replaced by a professional. Or
questions please turn to the Westfalia customer service.
Operation
39