Westfalia WS920 Instructions Originales page 16

ing workflows correctly.
 Keep other persons at a safe distance from your working
area. Persons entering your working area must wear personal
protective equipment. Fragments of the workpiece or the
attachment may be thrown away and cause injuries outside
the immediate working area.
 Hold the tool only by the isolated handles while undertaking
work during which the tool or the attachment can touch hidden
life wires or its own power cable. Contact with life wires can
cause metal parts of the housing to become life and can
cause electric shock.
 Keep the power cable away from the spinning attachment. If
you loose control over the electric tool the power cord may be
cut or become caught and your hand or arm may be caught in
the attachment.
 Do not lay down the electric tool before the attachment has
stopped spinning. The spinning attachment may come in
touch with the surface, which may cause loss of control.
 Do not carry the electric tool while it is running. Clothes may
become caught in the spinning attachment and the attach-
ment may cause severe injury.
 Periodically clean the ventilation slots of the electric tool. The
cooling ventilator draws dust into the housing. An accumula-
tion of metallic dust may lead to dangerous electrical condi-
tions.
 Do not use the tool close to combustible materials. Flying
sparks may ignite such materials.
 Do not use attachments which require liquid coolants. Use of
water or other liquid coolants can cause an electric shock.
Kickback
 Kickback is the sudden reaction of a wedged or locked
spinning attachment such as a grinding or sanding disc or a
Safety Notes
12