Westfalia WS920 Instructions Originales page 14

Please note the included General Safety Notes and the
following safety notes to avoid malfunctions, damage
or physical injury:
 Make sure the voltage corresponds to the type label on the
electric tool.
 Power tool plugs must match the outlet. Never modify the plug
in any way. Do not use any adapter plugs with earthed
(grounded) power tools. Unmodified plugs and matching
outlets will reduce risk of electric shock.
 Persons with limited physical, sensorial or mental abilities are
not allowed to use the electric tool, unless they are supervised
and briefed by a qualified person.
 This angle grinder can be used as a grinder, and angle
grinder. Please note all safety advice, descriptions and data
supplied with the electric tool. Disregarding these notes may
lead to electric shock, fire and/or serious injury.
 This angle grinder is not suitable for use as sander, with a
wire brush, or as polisher. Using the tool in ways not intended
by the manufacturer is dangerous and can cause injury.
 Do not use attachments not especially designed for this
device and recommended for this device by the manufacturer.
The fact that an attachment can be physically attached to the
tool does not ensure safe operation.
 The grinding surface of the centre depressed wheels must be
mounted below the plane of the safety hood edge. An im-
properly mounted wheel that projects through the plane of the
safety hood edge cannot be adequately protected.
 Do not attach a saw chain woodcarving blade or toothed saw
blade. Such blades create frequent kickback and loss of
control.
Safety Notes
10