Refrigerator Features; Crisper Humidity Control (On Some Models) - Danby Designer DFF177A1WDD Guide D'utilisation Et D'entretien

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Refrigerator Features

Important information to know about glass shelves
and covers:
Do not clean glass shelves or covers with warm water when
they are cold. Shelves and covers may break if exposed to
sudden temperature changes or impact, such as bumping.
Tempered glass is designed to shatter into many small,
pebble-size pieces. This is normal. Glass shelves and covers
are heavy. Use both hands when removing them to avoid
dropping.
This manual covers several different models. The refrigerator you have
purchased may have some or all of the items listed. The locations of the
features may not match those of your model.
Refrigerator Shelves
Store similar foods together and adjust the shelves to fit different
heights. This reduces the time the refrigerator door is open and saves
energy.
To Remove and Replace a Shelf:
1. Remove the shelf by lifting straight up, and pulling the shelf out.
2. Replace the shelf by lowering the shelf onto the supports on the
side wall.
Crispers and Meat Drawers
To Remove and Replace a Drawer:
1. Slide drawer straight out to the stop. Lift the front of the drawer and
slide it out the rest of the way.
2. Replace a drawer by sliding it back in fully past the stop.
Meat Storage Guide
Store most meat in original wrapping as long as it is airtight and
moisture-proof. Rewrap if necessary. See the following chart for storage
times. When storing meat longer than the times given, freeze the meat.
Fresh fish or shellfish .......................... use same day as purchased
Chicken, ground beef, variety meats (liver)........................ 1-2 days
Cold cuts, steaks/roasts..................................................... 3-5 days
Cured meats .................................................................... 7-10 days
Leftovers - Cover leftovers with plastic wrap, aluminum foil, or place in
containers with tight fitting lids.
Crisper Cover
To Remove the Crisper(s) Cover:
1. Remove crisper(s). Hold the glass insert firmly with one hand and
press up in the center of the glass insert until it rises above the
plastic frame. Slowly slide the glass insert forward to remove.
2. Lift the cover frame and remove it.
To Replace Crisper Cover:
1. Fit the back of the cover frame into the supports on the side walls
of the refrigerator. Lower the front of the cover frame into place.
2. Slide the rear of the glass insert into the cover frame and lower the
front into place.
Crisper Humidity Control
You can adjust the amount of humidity in the moisture-sealed crisper
using the settings between "+" and "-".
"-" (open) lets moist air out of the crisper for best storage of fruits and
vegetables with skins.
Fruit: Wash, let dry and store in refrigerator in plastic bag in crisper.
Do not wash or hull berries until they are ready to use. Sort and
keep berries in original container in crisper.
Vegetables with skins: Place in plastic bag or plastic container and
store in crisper.
"+" (closed) keeps moist air in the crisper for best storage of fresh, leafy
vegetables.
Leafy vegetables: Wash in cold water, drain and trim or tear off
bruised and discolored areas. Place in plastic bag or plastic
container and store in crisper.
Door Bin
To Remove and Replace the Bin:
1. Remove the bin by tipping the front of the bin forward and sliding
out.
2. Replace the bin by sliding it in above the desired support, and then
tilting it back into place.
8
(on some models)

Publicité

Chapitres

Table des Matières
loading

Table des Matières