Installation Instructions; Features - Danby Designer DUFM085A2WDD1 Guide D'utilisation Et Soins De Propriètaire

INSTALLATION
Remove exterior and interior packings, wipe the outside thoroughly with a soft dry cloth and the inside with a
wet, lukewarm cloth. Avoid placing the cabinet in a narrow recess or near any heat source, direct sunlight, or
moisture. Let air circulate freely around the cabinet. Keep the rear of the freezer 5 inches away from the wall.
Location:
1) Select a place with a strong, level floor.
2) Allow 5 inches of space between the back of the freezer and any adjacent wall.
3) Avoid direct sunlight and heat. Direct sunlight may affect the acrylic coating. Heat sources nearby will
cause higher electricity consumption.
4) Avoid very moist places. Too much moisture in the air will cause frost to form very quickly on the
evaporator, and your freezer will have to be defrosted more frequently.
1) THERMOSTAT DIAL: For controlling the
temperature inside the freezer. Turns the motor
on as soon as the temperature rises above the
desired level.
2) FREEZER SHELVES: 3 full width
freezer shelves.
3) MAGNETIC GASKET: Tight fitting door seal
keeps all the cooling power locked inside. No
hooks or latches.
4) DOOR BINS (4)
5) DRIP TRAY

INSTALLATION INSTRUCTIONS

FEATURES

2