Features - Danby Designer DCR032C1BSLDD Guide D'utilisation Et Soins De Propriètaire

Installation Instructions
DOOR REVERSAL
INSTRUCTIONS
5 Move the door bushing (shown on the right in Figure 5) to the left, and the
plastic hole cover (shown on the left in Figure 5) to the right.
6 Move the door stopper located on the right side of the door to the left side as
shown in Figure 6. If your unit has 2 pre-installed door stops, one on each
side, this step is not necessary. Install the door onto the lower hinge located
on the left side.
7 Install the upper hinge and hinge cover on the left side. Place the plas-
tic hole covers in the holes on the right side of the top of the refrigerator.

Features

1 THERMOSTAT DIAL: For controlling the temperature
inside the refrigerator; the compressor activates as
soon as the temperature rises above the desired level.
2 FREEZER COMPARTMENT WITH FREEZER DOOR:
Separate freezer section can hold small items.
3 WIRE SHELF
4 DRIP TRAY: Catches the water that drips off the
evaporator when defrosting.
5 MAGNETIC GASKET: Tight fitting door seal keeps all
the cooling power locked inside. No hooks or latches.
6 BOTTLE RACKS: For tall, small and medium cans or
jars.
7 CANSTOR Door Liner: Holds 355mL cans of pop,
juice, or beer
8 LEVELING LEGS: Adjust so the unit is leveled
on the surface.
(2)
(4)
(3)
(8)
6
Figure 5
Figure 6
Figure 7
(1)
(5)
(6)
(7)