Mr Handsfree BLUE SMART Mode D'emploi page 6

REMOTE CONTROL (RC1)
The remote control unit includes:
1. Central button with turning wheel.
2. Easy fixation system via double-sided tape.
3. Buttons with backlight.
If press:
- Receiving a call.
- Restoring the connection.
MICROPHONE (M1)
The microphone is developed especially for in-car use. The location of the microphone significantly influences the acoustic
quality. For a recommendation on locating the microphone, see the "Installation" chapter.
The microphone has a 2 positional button for adjusting its sensitivity. Press the button on the microphone to increase the
volume to the other caller.
SYSTEM CABLES SC2 AND SC3 (Optional)
System cable SC2 connects the handsfree unit with the power supply and the ignition system and is used for muting the radio.
System cable SC3 is used for plug & drive installation. It provides power supply via the cigarette lighter.
Both system cables are supplied with changeable fuses. How to change the fuses is indicated in the illustration below.
If turn Central button to the right or to the left:
- Navigation in the menu.
- Increasing or decreasing the speaker volume during a call.
- Increasing or decreasing the voice prompts volume.
If press Central button:
- Confirming the selection in the menu.
3
2
1
If press:
- Ending a call.
- Rejecting an incoming call.
- Returning to Standby mode.
GB - 3
4