Mr Handsfree BLUE SMART Mode D'emploi page 13

• To activate voice dialing, press the
• Press to confirm. The voice prompt "Activated" will be played.
• After the beep, say the tag.
• The Blue Smart will activate the corresponding tag from the phone memory and dial the number.
2. ANSWERING A CALL
To answer an incoming call, press the green button
3. ENDING A CALL
Press the red button to end a call.
4. REJECTING A CALL
If you do not want to accept a call, press the red button
5. REDIAL
• In Standby mode, press the green button
• The phone will redial the last dialed number.
• Press the red button
6. AUTOMATIC ANSWER
If the Automatic Answer function is set on your phone, the phone will automatically answer an incoming call after some
rings. This function can be activated or deactivated in the Blue Smart menu.
• To activate the Autoanswer function, press and turn the
corresponding voice prompt will be played.
• Press the button to confirm. The voice prompt will indicate the current status of this option: "Autoanswer On".
• To deactivate the Autoanswer function, you should repeat this procedure.
7. SPEED DIAL
Speed dialing allows you to set a single-digit number for the telephone numbers you call most. You only have to select the
speed dial number to dial the corresponding telephone number. The Blue Smart can store up to 10 speed dial numbers.
Programming speed dial numbers
• Press and turn the
played.
• Press the button to confirm. You will hear a confirmation tone, followed by the voice prompt "One". This indicates
the first memory location.
• Turn the button to select the memory location where you would like to store the telephone number (1 to 0). You will
hear the corresponding voice prompts.
• Press the button to confirm. You will hear a confirmation tone, followed by the voice prompt "One". This indicates
that you can start entering the telephone number.
• Turn the button to select the first digit of the telephone number. You will hear the corresponding voice prompts
indicating the following characters: 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, +, #, *.
• Press the button to confirm the first digit. You will hear a confirmation tone.
• Repeat this procedure until you have selected and confirmed all digits of the telephone number.
• Press the green button
• The telephone number you have entered will now correspond to the speed dial number that you have selected.
Dialing speed dial numbers
• Press and turn the
• Press the button to confirm. You will hear the voice prompt "One". This indicates the first speed dial number.
button. The voice prompt "Voice dialing" will be played.
. The voice prompt "Last call" will be played.
to cancel.
button and select the item "Programming Speed dial". The corresponding voice prompt will be
to confirm the complete telephone number.
button and select the item "Speed dial". The corresponding voice prompt will be played.
.
.
button to select the menu item "Autoanswer Off". The
GB - 10