Safety Instructions; What Does Mr Handsfree Blue Smart Include; Description - Mr Handsfree BLUE SMART Mode D'emploi

SAFETY INSTRUCTIONS

SAFETY INSTRUCTIONS
1. Before starting the installation, make sure that the car ignition is off.
2. Make sure that the operation of the carkit will never influence your safety.
3. Make sure not to damage electrical cables, fuel or brake lines or safety equipment during the installation.
4. Make sure not to impact the steering or braking system or other key systems essential for the proper operation of the
car when installing the carkit. Make sure that the deployment of the airbags is not blocked or impaired in any way.
5. The carkit may only be used at an operating voltage of 12V with the minus pole earthed. Failure to observe this require-
ment may result in damage to the car's electronics system.
6. Do not operate your carkit off the car battery for a long time, i.e. with the engine switched off, as this may cause your
battery to run dry.

WHAT DOES MR HANDSFREE BLUE SMART INCLUDE?

WHAT DOES MR HANDSFREE BLUE SMART INCLUDE?
1. Handsfree unit with built-in speaker (SM3)
2. Double-sided tape plate for fixation of the handsfree unit
3. Set of screws for fixation of the handsfree unit – 5 pcs.
4. Remote control (RC1)
5. Double-sided tape plate for fixation of the remote control
6. Microphone (M1)
7. Clips for guiding the microphone cable – 4 pcs.
8. Cable set – Option 1 (Optional)
8.1. Adapter for connecting the handsfree unit to the car via the cigarette lighter (SC3). It includes a changeable fuse
and coil cord.
8.2. Power cable for connecting the handsfree unit to the power supply of the car, the ignition system and for muting
the radio (SC2). It includes a changeable fuse.
8.3. Contact clips for connecting the SC2 cable to the car circuitries – 5 pcs.
9. Cable set – Option 2 (Optional, available separately)
9.1. Mute box (MB2)
9.2. Cable SC5 with ISO sockets for connection to the car circuitries
10. Central button
11. Green button
12. Red button
13. Quick Reference Guide
14. CD with manual

DESCRIPTION

DESCRIPTION
HANDSFREE UNIT (SM3)
The handsfree unit includes built-in speaker, echo canceller, noise suppressor, DSP technology and Bluetooth
technology, which provides a wireless connection with Bluetooth
The handsfree unit has the following jacks for connecting external units:
1. Socket for remote control (RC1) cable.
2. Microphone socket M1.
3. Socket for external speaker connection (3-6W, min 8 Ohm). When the external speaker is connected to socket 3, the
built-in speaker is switched off automatically.
4. Socket for SC2, SC3 or SC5 cables connection.
®
mobile phones.
GB - 2
® wireless