Operation - Mr Handsfree BLUE SMART Mode D'emploi

OPERATION

OPERATION
Since devices with Bluetooth
need to be in direct line-of-sight. The 2 devices only need to be within a maximum of 10 meters of each other, so you don't
need to take your phone out of your pocket or bag to make and receive calls via the carkit.
®
Since Bluetooth phones produced by different manufacturers provide various functionalities; some functions described in
this user's manual could be different or may not be available.
SWITCHING ON/OFF
If the mr Handsfree Blue Smart is connected to the power via the adapter with cable SC3, you can switch on the unit by
clicking the adapter into the cigarette lighter.
If the mr Handsfree Blue Smart is connected to the power via cable SC2 or SC5, the unit will switch on automatically when
you turn the ignition key.
Mr Handsfree Blue Smart will turn off automatically when the ignition is off.
MENU STRUCTURE
All functions of the unit are grouped in the voice menu.
• To access the menu, press the central button
• To move in the menu, turn the central button
voice prompts through the handsfree speaker.
• If no selection is made, the Blue Smart will automatically return to Standby mode after a few seconds. You can also
return to Standby mode by pressing the red button
The menu structure is shown below:
Handsfree mode/
® technology communicate through radio waves, your carkit and your mobile phone do not
to the left or to the right. The different menu items will be indicated by
Rear ON/OFF
Headset mode
Auto answer
ON/OFF
Disconnection
once. The white LED behind the button will light.
.
Voice dialing
Speed dial
Programming
Pairing
Connection/
GB - 8
speed dial