Publicité
Water
Supply
Lines
Water Line
8. Finish the Installation
CAUTION: Risk of personal injury and product damage. Do not stand directly in front of faucet when
turning on supplies. Air may be trapped in lines.
Connect Plumbing
- Attach water lines to supplies. Hoses are identified with hot (red) and cold (blue) labels.
- Turn supplies on and check for leaks. Flush water through lines.
- Attach the water line to the spout assembly.
- Conduct a final check for leaks.
- Tuck hoses back into cabinet, being careful not to kink hoses.
Install Shelves
- Determine shelf locations and install the shelf pins.
- Install the shelves by aligning notches on bottom of shelf with pins.
Kohler Co.
Spout
Assembly
As Viewed
From Below
9
Notch
Shelf Pin
B
1011414-2-
Publicité
