Publicité
Loosen screw
and slide hinge
assembly out.
Hinge
Assembly
3. Cabinet Assembly
- Remove screw from the hinge as illustrated. Slide door and hinge off cabinet and store it in the cabinet box. Make
sure all edges of the door are protected.
- Lay the cabinet on its back. The cabinet should be assembled on a flat surface, not the wall.
- If combining multiple cabinets together, lay the cabinets side by side. Note the locations of the holes in the
cabinets which are used to secure the connectors and side kits in illustration above.
NOTE: No more than three cabinets should be secured together at one time prior to installation.
- Use two connecting blocks for each cabinet addition. Assemble the cabinet to the connecting blocks from the
inside of the cabinet with #10 x 1/2" thread cut screws (provided).
Kohler Co.
#10 x 1/2"
Screw
5
Connecting
Block
B
1011414-2-
Publicité
