Publicité
Electrical
Area
Door Latch
HOUSE
B
Wiring Diagram
5. Position the Cabinets, Connect the Electricity
CAUTION: Risk of personal injury and product damage. Mirror cabinets are very heavy. It is recommended
that cabinets be lifted with assistance.
- Make sure all connections have been made if mounting multiple cabinets together.
NOTE: No more than three cabinets should be mounted together at the time of installation.
- Be sure the electrical wire is in position and can be reached from the front of the cabinets so electrical connections
can be made.
- Remove the attaching screws on the cover of the electrical box and set cover and screws aside.
- Set the bottom channel of the cabinet in the Z" mounting bar.
- While holding cabinet in place, feed the electrical wire through the electrical area, making sure you have enough
wire exposed to make the connection.
- Position top clips and drill holes through wall. If a brace is not installed, align top clips with stud(s). Fasten clips
securely using #10 x 2" screws.
NOTE: If the cabinet is not being fastened to a brace or stud you must attach it with the anchors supplied.
- Attach the black door latch with screw and acorn nut using the pre drilled hole on the bottom of the cabinet.
- Make electrical connections and re attach the electrical cover.
Kohler Co.
Electrical Box
Cover
Screw
Acorn Nut
Screw
G
W
B
W
G
Top Clip
Back Side
#10 x 2" Screw
Bottom of Cabinet
7
Top of Cabinet
Channel
"Z" Mounting Bar
Back Side
1011414-2-
B
Publicité
