Publicité
Les langues disponibles
Les langues disponibles
Please take time to read the following safety operating instructions. They are the key to
the successful operation of your Ultra-Max Conveyor Oven.
SAFETY TIPS
For your safety, read before operating.
If you smell gas:
1. DO NOT try to light any appliance.
2. DO NOT touch any electrical switches.
3. Use an exterior phone to call your gas
supplier immediately.
4. If you cannot reach your gas supplier, call
the fire department.
In the event of a power failure:
1. Turn all switches off.
2. DO NOT attempt to operate the oven until
the power is restored.
"TIME" LIGHT
To Start:
Push power switch "ON."
If burner does not light in one minute
push the power switch to the "OFF"
position and wait five minutes.
After five minutes, retry.
Adjusting TIME and TEMPERATURE:
1) Press the up and down buttons
(
) at the same time, hold for four
seconds until TIME display is blank.
2) Press the enter button (
) to
switch between TIME and
TEMPERATURE.
3) Press the up button (
) to increase
or the down button (
) to decrease
TIME or TEMPERATURE. Hold
button down for faster display
changes.
4) After five seconds, the new numbers
will be saved and the oven will display
new settings.
"HEAT" LIGHT
ON / MARCHE
OFF / ARRÊTE
Pour Commencer:
Poussez le commutateur de puissance à
"MARCHE."
Si le brûleur n'allume pas en une minute,
poussée le commutateur de puissance dans
la position de "ARRÊTE" et attend 5 minutes.
Après cinq minutes, nouvelle tentative.
Ajustement du TEMPS et de la
TEMPÉRATURE:
1) Tenez "vers le haut" et "vers le bas"
boutonne (
) en même temps. Tenez
les boutons pendant quatre secondes
jusqu'à ce que l'affichage de la
TEMPS soit blanc.
2) Appuyez sur le bouton de "entrée" (
pour commuter entre le TEMPS et la
TEMPÉRATURE.
3) Tenez "vers le haut" bouton
augmenter ou "vers le bas" boutonnez
pour diminution de le TEMPS ou
TEMPÉRATURE. Maintenez le bouton pour
des changements plus rapides.
4) Après cinq secondes, les nouveaux
nombres seront sauvés et le four montrera
de nouveaux arrangements.
A Star Manufacturing Company
General Safety Tips:
1. If the oven needs to be moved for any
reason, the power must be disconnected
from the unit before doing so.
2. DO NOT remove the control box cover
unless the oven is unplugged.
OPERATION
To turn the oven on:
1. Push the power switch to "ON."
2. After the fan begins to build pressure,
the pressure switch will provide power to
the control board to engage the heating
element contactor. You should hear an
initial "click" from the contactor as it begins
to heat.
To adjust the time and temperature:
1. Press the DOWN and UP arrows (
the same time. Hold for four seconds until
the TEMPERATURE display goes blank.
2. Press the ENTER button (
between TIME and TEMPERATURE.
3. Press the UP arrow (
DOWN arrow (
TEMPERATURE. Hold either button down
for faster display changes.
4. After five seconds, the new numbers will
be saved and the oven will display the new
settings.
To turn the oven off:
1. Push the power switch to "OFF." The
oven is equipped with a cool-down feature
for motor shaft and bearing protection.
This enables the blower motor(s) to run
regardless of the controller status. The
)
blower(s) continue to run until the oven
cools to a safe temperature.
( ) pour
( )
) to switch
) to increase or the
) to decrease the TIME or
) at
Publicité
