AquaScape DIY Pond Kit Manuel D'instructions page 9

STEP 2
PLACE BIOFALL FILTER AND SKIMMER
• The Biofall filter will be used to create your waterfall and
should be positioned so it's facing a main viewing area.
• Make sure it is placed close to the edge of the basin so you
can connect the pond liner to the Biofall filter.
• In order to maximize circulation, the Biofall and Skimmer are
ideally placed on opposite ends of the pond, directly across
from each other. (See Ex. 1)
Ex. 1
CAN 1-866-766-3426 |
STEP 3
LAY PLUMBING
• To eliminate the need for making a trench for the pipe,
lay the kink-free pipe around the perimeter of the pond
basin. This should be completed before you begin your
excavation so the soil you remove from the pond can
cover the kink-free pipe, disguising it from sight.
(See Ex. 2)
Ex. 2
US 1-866-877-6637
9