AquaScape DIY Pond Kit Manuel D'instructions page 19

• Cover all remaining fl at surfaces with a couple inches of
decorative gravel. This will help lock the boulders in place,
as well as cover the remaining liner, protecting it from
ultraviolet rays, and giving bacteria a place to colonize.
STEP 9
WASH ROCKS AND GRAVEL
• Using a garden hose, wash the rock and gravel down in
order to remove the dust and dirt. Use the pump provided
with the kit attached to a scrap section of kink-free pipe.
The pump can be temporarily be placed in the lowest
point of the pond and the dirty water discharged to a
drainage area in the yard.
CAN 1-866-766-3426 |
STEP 10
COMPLETE THE SIGNATURE SERIES 200
SKIMMER INSTALLATION
• Insert the (optional) Filter Brush Cartridge, and the Debri
Net into the Skimmer. See image below for placement.


US 1-866-877-6637
Skimmer Filter
(Optional) Filter Brush

Cartridge secures brushes
making it easy to remove for
cleaning
Large volume debris net

19