Publicité
Les langues disponibles
Les langues disponibles
OPERATING INSTRUCTIONS
CONTROL PANEL
1. Power button
2. Setting button
3. LED display
4. Temperature scale indicator
5. Up and down buttons
1
2
FIRST TIME USE
1. Plug in the power cord and turn on the power
supply.
2. Press and hold the power button for 3 - 5
seconds to power on.
3. The digital display will show the current
temperature inside the cabinet.
THERMOELECTRIC COOLING
This refrigerator is powered by semiconductor
thermoelectric refrigeration technology based on the
Peltier effect. Semiconductor refrigeration does not
contain hydrocarbons or refrigeration coolant.
The thermoelectric unit inside this refrigerator will
use both cooling and heating to keep the internal
cabinet as close to the set temperature as possible. If
the temperature inside the cabinet is higher than the
set temperature, the appliance will engage cooling
mode. If the temperature inside the cabinet is lower
than the set temperature, the appliance will engage
heat mode.
The recommended ambient temperature for most
effi cient performance is 10 - 27°C (50 - 81°F).
3
4
5
TEMPERATURE CONTROL
1. Press and hold the set button for 3 seconds to set
the temperature.
2. Use the up and down arrows to set the desired
temperature. The temperature can be set
between 2 - 8°C (36 - 46°F).
Note: When inactive the display panel will show
the temperature inside the cabinet. The display
can show a range of temperatures between -9 -
92°C (16 - 193°F) and may occasionally show
temperatures outside the setting range if the ambient
temperature is extremely hot or cold.
TEMPERATURE SCALE
1. Press the set button once to change the
temperature scale.
2. Press the up and down buttons to switch
between F and C.
DOOR LIGHT
1. Press the light button at the bottom of the mirror
to turn on the light strip around the door.
2. Press the light button again to adjust the
brightness of the light. The light can be set to
low, medium or high brightness.
3. Press the light button a fourth time to turn it off.
4. If there is no input within 15 minutes, the light
will turn off automatically to save energy.
4
Publicité
