Before Using For The First Time; Initial Cleaning; Operating The Hob; Touch Control Sensor Panels - AEG 66300KF-an Instructions De Montage Et Mode D'emploi

Before Using for the first time

Initial Cleaning

Wipe the ceramic glass surface with a damp cloth.
1
Important: Do not use any caustic, abrasive cleaners! The surface could
be damaged.

Operating the hob

Touch control sensor panels

To operate the touch control sensor panels, touch the desired panel
with the tip of your pointed finger until the relevant displays illuminate
or go out, or until the desired function is carried out.
3
Ensure that you are only touching one sensor panel when operating the
appliance. If you finger is too flat on the panel, the sensor panel below
may be actuated as well.

Switching on the appliance

The entire appliance is switched on using the "On/Off" sensor panel
I.
Touch the "On/Off" sensor panel for approx. two seconds.
The digital displays will show ¾.
3
After the "On/Off" sensor panel has been actuated to switch on your
appliance, a cooking setting must be selected for a cooking zone within
approx. 10 seconds, or a time must be set using the timer (egg timer
function). If not, the appliance will switch itself off again for reasons
related to safety.
44
All manuals and user guides at all-guides.com