Publicité
Les langues disponibles
Les langues disponibles
6 |
Display functions FOX-320
Capacity use of battery 1:
The value can be set in increments of 5 %. The value of 80 % means
that the consumers connected to the output terminal are only switched
off when there is only 20 % of residual capacity left in battery 1.
A value higher than 80 % cannot be set, due to safety reasons.
If the output function is changed, the capacity use will be reset to the
default value defined for this function.
Default values:
Function: Discharge-Protection = 80 %
Function: Night-Light = 50 %
No changes are made when the functions ON and OFF are selected.
Setting of the battery type:
In order to best adapt the charge characteristic curve and the cut-off
voltage to the connected battery type, the type can be set using this
function.
The following options are available:
· AGM
· Gel
· Lead-acid
Default setting: AGM
Contrast setting:
To make the display easier to read in different lighting conditions, you
can adjust the contrast.
25
Publicité
