Publicité
Les langues disponibles
Les langues disponibles
3 |
Connection
For a better heat dissipation the FOX-320 must be mounted on a
vertical wall using the two screws included.
Warning: During operation the cooling element can become hot.
[ ! ]
Connect the cables in random order, as described below.
Observe the polarity!
When battery 1 is connected, the controller will start. During the
starting phase the controller will perform a self-test and recognises the
system voltage. Then a sequence of flashes from the LEDs will show
the status.
Warning: Both battery systems on the FOX-320 must have the
[ ! ]
same system voltage.
There is no problem to operate the FOX-320 with battery 1 only.
+
+
Solar module
19
-
+
B1
-
-
+
Battery 1
1
-
+
-
B2
+
-
Battery 2
2
-
+
+
-
Consumer
Publicité
