Spring And Axle Assembly - DETAIL K2 MFT4X8 Mode D'emploi

1. Place 3 leaf spring (8) into spring hanger with eye forward, towards the drawbar of the trailer. Install
M14 x 85 (9) go through spring hanger, and spring eye and lock with M14 nyloc nut.
2. Install M14 x 85 go through spring tail and spring hangers and lock with M14 nyloc nut.
3. Place Axle (7) onto spring (8) with hole in axle over peg on spring. Fasten Axle to
two U bolts (9), spring plate (6) and lock with four M10 nuts as shown.
Item N Description
o.
6 Spring plate
7 Axle
8 3-leaf spring
9 U-bolt M10 x 85 & nuts (set)
20 Hex bolt M14 x 85 &
nyloc nut (set)
�ig.5
ASSEMBLY ASSEMBLY
STEP 5 STEP 5

SPRING AND AXLE ASSEMBLY

Qty.
2
1
2
4
4
each spring with
11
v.200615