Siemens ET 200iSP Mode D'emploi page 8

Εnglish
Certification
EN 60079-0 : 2012 + A11 : 2013
EN 60079-1 : 2014
EN 60079-7 : 2016
EN 60079-11 : 2012
ATEX II 2 G Ex db eb [ib] IIC T4 Gb
I M2 Ex db eb [ib] I Mb
KEMA 09ATEX0156
IECEx IECEx KEM 09.0070
INMETRO UL-BR 12.0066
Note
The PS AC120/230V power supply with device category
2G may be used in zone 1 hazardous areas.
Installation
Danger
It is possible that sparks or impermissibly high surface
temperatures may occur during the installation. Never
perform an installation under explosive conditions!
• In making the installation, observe the EN 60 079-14
regulations.
• The PS AC120/230V power supply must be mounted in
Zone 1 in an enclosure with the Ex e degree of protection.
• In Zone 2, the PS AC120/230V power supply must be
mounted in an enclosure providing a degree of protection
of at least IP 54 (must have manufacturer's statement for
Zone 2).
A5E41144052-AB Εnglish
CE
0344