Siemens ET 200iSP Mode D'emploi page 10

Εnglish
Commissioning
• The relevant national regulations must be observed when
commissioning the system.
• When checking the functionality of the equipment, observe
the EN 60 079-17 guidelines. This standard includes the
regulations found in the international standard
IEC 60 079-17.
Technical Data
Voltages, currents, potentials
Supply voltage
Isolation
• between supply voltage and power bus
• between supply voltage and backplane bus
as well as the IM supply
Insulation tested with
• between supply voltage and all output
voltages
Current consumption
• from AC 120/230V supply voltage
Power loss of submodule
Approved input power
A5E41144052-AB Εnglish
AC 120/230V
Yes
Yes
AC 2500 V
max. 1.04 A
21.3 W
max. 82.2 W