Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
·The power supply should meet the following requirements.
-
Do not share one socket with other appliances.
-
Power supply is 115V CA，60Hz
2. Cooling operation
-
Press the "Mode" button until the "Cool" icon appears.
-
Press the "Temp+"or" Temp-"button to select the desired room temperature. (16℃-31℃ / 62
-90
)
O
F
Press the "Speed" button to select wind speed.
-
3. Dehumidifying operation
Press the "Mode" button until the "Dehumidifier indicator light" blinks
-
Set the temperature to current room temperature minus 2℃/2
Set the fan motor to LOW wind speed.
-
4. Fan operation
Press the "Mode" button till the "Fan" icon appears.
-
-
Press the "Speed" button to select wind speed.
5. Heating operation (on some models only)
-
Press the "Mode" button until the "Heat" icon appears.
Press the "Temp+"or" Temp-" button to select the desired room temperature. (16℃-31℃ / 62
-
-90
)
O
F
-
Press the "Speed" button to select wind speed.
-
When the unit is in heating mode, please remove the rubber cap on the draining hole and attach
the draining hose to maximize heating performance (ONLY IN NON-COOLING OR
DEHUMIDIFICATION)
6. Timer operation
Timer ON setting:
-
When the air conditioner is OFF, press "Timer" button and select a desired ON time with the
temperature and time setting buttons.
-
"Preset ON Time" is displayed on the operation panel.
ON time can be set at any time in 0-24 hour increments.
-
. (16℃-31℃ / 62
O
F
9
O
F
-90
)
O
O
F
F
O
F
Publicité
Chapitres
Table des Matières
Dépannage
